0

Carrello

0

Carrello

mandrino msctnr_af C
mandrino msctnr_af B
mandrino msctnr_af A
Mandrino portapinze MSCTNR/AF - 002
mandrino msctnr_af C
mandrino msctnr_af B
mandrino msctnr_af A
Mandrino portapinze MSCTNR/AF - 002

Collet chucks MSCTNR/AF

Category:

- +
Made in italy
MSCTNR/AF collet chucks are clamping tools for secondary heads of CNC lathes. They are made from a block of steel, galvanized and tempered at 60 HRC. Bellegrandi collet chucks are totally adjusted to ensure maximum duration, machining precision and balancing. Opening and closing of the collet in the MSCTNR/AF spindle is done by hydraulic or pneumatic cylinder applied at the rear of the lathe shaft. The collets that can be installed on this chuck are:
  • Simple BA type cone
Using appropriate adapters:
  • PE expandable type collets
  • PET expandable type collets
The MSCTNR spindle is equipped with the PART EXPULSION GROUP, when the lathe does not have it. On request, the chuck may be supplied without the PART EXPULSION GROUP. The MSCTNR collet holding chuck was made to allow the maximum approach to the tool holding turret group.
MSCTNR/AF collet chucks are clamping tools for secondary heads of CNC lathes. They are made from a block of steel, galvanized and tempered at 60 HRC. Bellegrandi collet chucks are totally adjusted to ensure maximum duration, machining precision and balancing. Opening and closing of the collet in the MSCTNR/AF spindle is done by hydraulic or pneumatic cylinder applied at the rear of the lathe shaft. The collets that can be installed on this chuck are:
  • Simple BA type cone
Using appropriate adapters:
  • PE expandable type collets
  • PET expandable type collets
The MSCTNR spindle is equipped with the PART EXPULSION GROUP, when the lathe does not have it. On request, the chuck may be supplied without the PART EXPULSION GROUP. The MSCTNR collet holding chuck was made to allow the maximum approach to the tool holding turret group.

Download files

Data sheet

Technical Specifications

Modello Overall dimensions Strength KN RPM KG
A B – N° screws TCE C d
min÷max		 E F G H I L M N P Q S T Traction
or push		 tightening
MSCTNR-42/AF-110 120 82,6 – N. 3 / M10 110 4~42 80 M50X1,5 103 26 105 131 – 13 63 25 23 74 45 72 7000 6
MSCTNR-42/AF-115 125 82,6 – N. 3 / M10 115 4~42 80 M50x1,5 103 26 105 131 – 13 63 25 23 74 45 72 7000 7
MSCTNR-42/AF-140 150 104,8 – N. 6 / M10 140 4~42 80 M58x1,5 103 26 105 131 – 13 63 25 23 74 45 72 7000 9
MSCTNR-52/AF-140 150 104,8 – N. 6 / M10 140 4~52 90 M68x1,5 113 26 105 131 – 13 63 25 23 74 45 72 7000 10
MSCTNR-52/AF-170 180 133,4 – N. 6 / M12 170 4~52 90 M68x1,5 113 32 105 131 – 13 63 25 23 74 45 72 7000 11
MSCTNR-60/AF-140 150 104,8 – N. 6 / M10 140 4~60 114 M72x1,5 130 26 121 147 – 13 76 25 40 84 45 72 6000 12
MSCTNR-60/AF-170 180 133,4 – N. 6 / M12 170 4~60 114 M72x1,5 130 26 121 147 – 13 76 25 40 84 45 72 6000 13
MSCTNR-70/AF-150 157 133,4 – N. 6 / M12 150 5~70 125 M100x1,5 150 26 129 155 – 13 82 28 40 89 45 72 6000 16
MSCTNR-70/AF-170 180 133,4 – N. 6 / M12 170 5~70 125 M100x1,5 150 26 129 155 – 13 82 28 40 89 45 72 6000 16
MSCTNR-80/AF-180 187 160,0 – N. 6 / M16 180 6~80 145 M115x1,5 175 31 140 171 – 14 92 28 50 94 45 72 6000 22