Collet chucks MSCTN/ISO-A

Made in italy
MSCTN collet chucks are classic clamping tools for CNC lathes. They are made from a block of steel, galvanized and tempered at 60 HRC. Bellegrandi collet chucks are totally adjusted to ensure maximum duration, machining precision and balancing. Collet chuck MSCTN are made with adapters ISO-A (DIN 55026) and with a flange (AF). Opening and closing of the collet in the MSCTN spindle is done by hydraulic or pneumatic cylinder applied at the rear of the lathe shaft. The collets that can be installed on this chuck are:
  • “Impact” type with a simple BA cone or double with a BD type cone, multi diameter with BAS type sectors
  • BE traction type; PE and PET expandable type
For milling bars, we recommend using BD type double cone collets. For “reinforcement” the use of simple BA cone type collets is recommended. On request, different types of collets may be assembled using appropriate adapters. These may include “Schaublin” (type F and W), “Hardinge” or “Crawford”.
MSCTN collet chucks are classic clamping tools for CNC lathes. They are made from a block of steel, galvanized and tempered at 60 HRC. Bellegrandi collet chucks are totally adjusted to ensure maximum duration, machining precision and balancing. Collet chuck MSCTN are made with adapters ISO-A (DIN 55026) and with a flange (AF). Opening and closing of the collet in the MSCTN spindle is done by hydraulic or pneumatic cylinder applied at the rear of the lathe shaft. The collets that can be installed on this chuck are:
  • “Impact” type with a simple BA cone or double with a BD type cone, multi diameter with BAS type sectors
  • BE traction type; PE and PET expandable type
For milling bars, we recommend using BD type double cone collets. For “reinforcement” the use of simple BA cone type collets is recommended. On request, different types of collets may be assembled using appropriate adapters. These may include “Schaublin” (type F and W), “Hardinge” or “Crawford”.

Technical Specifications

Modello Dimensioni di ingombro Forza KN RPM KG
A

B – N° Viti TCE

ISO-A

d/min÷max

E F G H I L M N Trz/spi Serr.
MSCTN-32 / ISO-A 4″ 115 82,6 – N. 3 / M10 63,513 3 ~ 32 39 M48x1,5 88 25 96 121 30 14 35 56 8000 4,5
MSCTN-42 / ISO-A 4″ 115 82,6 – N. 3 / M10 63,513 4 ~ 42 50 M52x1,5 98 25 103 128 30 14 45 72 8000 4,5
MSCTN-42 / ISO-A 5″ 140 104,8 – N. 4 / M10 82,563 4 ~ 42 50 M58x1,5 98 25 107 132 32 14 60 96 8000 7
MSCTN-52 / ISO-A 5″ 140 104,8 – N. 4 / M10 82,563 4 ~ 52 55 M68x1,5 108 25 107 132 32 14 60 96 8000 7,5
MSCTN-52 / ISO-A 6″ 170 133,4 – N. 6 / M12 106,375 4 ~ 52 55 M68x1,5 108 32 102 134 34 14 60 96 8000 7,5
MSCTN-60 / ISO-A 6″ 170 133,4 – N. 6 / M12 106,375 4 ~ 60 74 M82x1,5 130 26 125 151 34 14 100 160 7000 13
MSCTN-60 / ISO-A 8″ 220 171,4 – N. 6 / M12 139,719 4 ~ 60 74 M82x1,5 130 35 118 153 36 14 100 160 7000 17,5
MSCTN-70 / ISO-A 6″ 170 133,4 – N. 6 / M12 106,375 6 ~ 70 85 M100x1,5 145 26 130 156 34 14 100 160 7000 13
MSCTN-70 / ISO-A 8″ 220 171,4 – N. 6 / M16 139,719 6 ~ 70 85 M100x1,5 145 35 124 159 37 14 100 160 7000 22
MSCTN-80 / ISO-A 8″ 220 171,4 – N. 6 / M16 139,719 6 ~ 80 95 M115x1,5 175 35 144 179 44 16 150 240 6000 25