MSCPE/AF Collet Holders with PE grippers

///MSCPE/AF Collet Holders with PE grippers
MSCPE/AF Collet Holders with PE grippers2018-10-22T09:56:42+00:00

The chuck for the main head (Main spindle) or counter-head (Sub spindle) for lathes equipped with a posterior cylinder.
PE-PET expandable collets, with cusps, etc., may be mounted by simply replacing the appropriate adaptors.

The Mscpe chucks are made from a block of steel, galvanized and tempered at 60HRC and are totally adapted to ensure the maximum duration, precision, and balance.
The Mscpe chucks are made with IS0-A (DIN 55026) and flange (AF) adapters.

Opening and closing of the expandable collets on the Mscpe chuck takes place through hydraulic or pneumatic cylinders applied later on the late shaft.

These are especially indicated for operations of holding parts on internal holes of pipes, electric motors, cylinders, etc…

SPINDLE MSCPE
Download Datasheet
Model Dimensions KG
A B – N° TCE Screws C E F N H
MSCPE 125 / AF-115 125 82,6 – N. 6 / M10 115 60 50 40 70 4
MSCPE 150 / AF-140 150 104,8 – N. 6 / M10 140 79 50 40 70 6
MSCPE 180 / AF-170 180 133,4 – N.6 / M12 170 102 50 40 70 9
MSCPE 230 / AF-220 230 171,4 – N.6 / M16 220 135 50 40 70 16

PE Collet Holders Adaptor

The adapter, entirely made from a block of galvanized, tempered and adjusted steel, is mounted on MSCPE chuck (or another prepared chuck). it has the task of bringing expandable colletwhit its tapered rodand piece stop flange, preventing collet from expanding too much thank to a stroke limiter.
Every collet class (PE A type; B type; C type, etc…) needs a specific adapter.

PE Collet Holders Adaptor - Technical drawing
Download Datasheet
Adapter
Type
Collet
Type PE
Dimensions Max. diam.
expansion
Max. traction
strength (KG)
Diameter Range
Ø d min. ÷ max.
E F G L M O. P max T
MSCPE-Aa AA 12÷18 105 50 M22x1,5 135 76 29 30 6 0,5 500
MSCPE-A A 18÷25 105 50 M22x1,5 135 76 29 30 10 0.5 1600
MSCPE-B B B1 25÷35 35,5÷50 105 105 50 50 M22x1,5 M22x1,5 135 135 76 76 29 29 30 30 14 14 0.5 0.5 3200 3200
MSCPE-C C C1 35÷50 50,5÷60 120 120 50 50 M22x1,5 M22x1,5 150 150 76 76 29 29 45 45 20 20 0.5 0.5 3200 3200
MSCPE-D D D1 50÷65 66÷80 125 125 50 50 M22x1,5 M22x1,5 165 165 76 76 29 29 60 60 25 25 1 1 4500 4500
MSCPE-E E E1 70÷85 86÷100 148 148 50 50 M22x1,5 M22x1,5 175 175 76 76 31 31 68 68 30 30 1 1 4500 4500
MSCPE-F F F1 90÷110 111÷130 185 185 50 50 M22x1,5 M22x1,5 199 199 76 76 38 38 85 85 30 30 1 1 4500 4500
MSCPE-G G G1 130÷160 161÷180 235 235 50 50 M22x1,5 M22x1,5 209 209 76 76 38 38 95 95 30 30 1 1 5000 5000
MSCPE-H H H1 180÷210 211÷230 285 285 50 50 M22x1,5 M22x1,5 212 212 76 76 41 41 95 95 30 30 1 1 5000 5000

Expandable PE Collet

It’s a static collet and the expansion is due to the recession of the tapered rod.
It can be used also as reinforcement collet with very short recovery lengths.

Expandable PE Collet - Technical drawing
Download Datasheet
Adapter
Type
Collet
Type
Dimensions Max. diam.
expansion
S
Diameter Range
Ø d min. ÷ max.
Ø B L L2
MSCPE-Aa AA 12÷18 30 40 103,5 0,5 5
MSCPE-A A A1 18÷25 25,5÷35 45 45 40 40 103,5 0.5 0.5 5
MSCPE-B B B1 25÷35 35,5÷50 48 60 40 40 103,5 0.5 0.5 5
MSCPE-C C C1 35÷50 50,5÷60 63 70 55 55 95,5 0.5 0.5 5
MSCPE-D D D1 50÷65 66÷80 75 90 70 70 109,5 1 1 5
MSCPE-E E E1 70÷85 86÷100 95 110 80 80 119,5 1 1 5
MSCPE-F F F1 90÷110 111÷130 135 145 100 100 143,5 1 1 8
MSCPE-G G G1 130÷160 161÷180 185 195 110 110 153,5 1 1 8
MSCPE-H H H1 180÷210 211÷230 235 245 110 110 156,5 1 1 8