Gildemeister bar holding collets

///Gildemeister bar holding collets
Gildemeister bar holding collets2018-09-05T17:08:48+00:00

Collets for multi-chuck lathes are the “traction” type made through tie-rods inside the machine.
The attachment thread may be internal or external. This allows very precise milling.

In addition to the typical bore of the collets (round, hexagonal or square) they can also be made according to templates designed by the customer.

Figura 1

Figura 2

Figura 3

Download Datasheet
Code E Description Fig. Dimensions Bore MAX
A B L α F Thread Round Hexag. Square
9013E AS12 2 26,8 34 88 15°5′ M24x1 sin. 12 11 8
9012E AS16/20 GS/GM20 1 34 42 90 16° M30x1 sin. 23 19 14
9017E AS 16/20 VARIANT 25 2 38 45,5 90 16° M34x0,75 sin. 27 24 18
9023E GM16 AC 3 30 39 80,5 15° AtcB ∅ 27,12×1,5 – 60° 16 14 11
9045E AS25 2 45 60,4 164 15° M40x1 sin. 25 22 17
GM26 AC 3 41 53 106 15° AtcB ∅ 37×2,7 – 30° 26 22 18
9069E AS/GS32 GM32/35 2 53 69,4 137 15° M48x1,5 sin. 38 31 22
9115E AS/GS/GM42 2 64 80,5 134 15° M59x1,5 sin. 45 40 28
9132E AS48 2 70 90,4 167,5 15° M65x1,5 sin. 53 45 33
9178E AS67 2 90 115,4 183,5 15° M85x1,5 sin. 67 58 47
9209E AS82 2 109 138,4 201 15° M102x1,5 sin. 82 70 57
9239E AS100 2 128 160,4 263 15° M122x1,5 sin. 100 87 71