All of the “F.lli Bellegrandi” flanges that appear in the following catalog are built of steel, galvanized and tempered at 60 HRC.
The flanges are completely adjusted and thus need no additional finishing.
Note for using the flanges:
- DIRECT flange type 1 (ISO-A)
- It is attached to the body of the MSCTN-AF collet holding chuck and directly mounted on the machine nose.
- INTERPOSED type 2 flange (ISO-A)
- This is used when the MSCTN/AF collet holding chuck must be mounted on a machine nose of dimensions smaller than that normal for the chuck centering diameter.
In this case, the INTERPOSED flange is mounted on the machine nose. Afterward, the collet-holding chuck is mounted and attached on the flange.
Type | Spindle Type | Dimensions | Kg | ||||||
---|---|---|---|---|---|---|---|---|---|
B | C | ISO-A | D | D’ | T | S | |||
1 | MSCTNR-42 / AF 115 | 82,6 | 115 | 4″-63,513 | 11 | 13 | 0,6 | ||
1 | MSCTNR-42 / AF 115 | 82,6 | 115 | 4″-63,513 | 11 | 20 | 1 | ||
1 | MSCTNR-42 / AF 140 | 104,8 | 140 | 5″-82,563 | 11 | 15 | 1 | ||
1 | MSCTNR-42 / AF 140 | 104,8 | 140 | 5″-82,563 | 11 | 20 | 1,3 | ||
1 | MSCTNR-42 / AF 140 | 104,8 | 140 | 5″-82,563 | 11 | 24 | 1,6 | ||
1 | MSCTNR-52 / AF 140 | 104,8 | 140 | 5″-82,563 | 11 | 15 | 1 | ||
1 | MSCTNR-52 / AF 140 | 104,8 | 140 | 5″-82,563 | 11 | 20 | 1,3 | ||
1 | MSCTNR-52 / AF 140 | 104,8 | 140 | 5″-82,563 | 11 | 24 | 1,6 | ||
1 | MSCTNR-52 / AF 170 | 133,4 | 170 | 6″-106,375 | 13 | 17 | 1,5 | ||
1 | MSCTNR-52 / AF 170 | 133,4 | 170 | 6″-106,375 | 13 | 24 | 2,1 | ||
1 | MSCTNR-52 / AF 170 | 133,4 | 170 | 6″-106,375 | 13 | 30 | 2,6 | ||
2 | MSCTNR-60 / AF 170 | 133,4 | 170 | 5″-82,563 | 11 | M12 | 104,8 | 24 | 2,7 |
2 | MSCTNR-60 / AF 170 | 133,4 | 170 | 5″-82,563 | 11 | M12 | 104,8 | 30 | 03:03 |
1 | MSCTNR-60 / AF 170 | 133,4 | 170 | 6″-106,375 | 13 | 17 | 1,5 | ||
1 | MSCTNR-60 / AF 170 | 133,4 | 170 | 6″-106,375 | 13 | 24 | 2,1 | ||
1 | MSCTNR-60 / AF 170 | 133,4 | 170 | 6″-106,375 | 13 | 30 | 2,6 | ||
1 | MSCTNR-60 / AF 140 | 104,8 | 140 | 5″-82,563 | 11 | 15 | 1 | ||
1 | MSCTNR-60 / AF 140 | 104,8 | 140 | 5″-82,563 | 11 | 20 | 1,3 | ||
1 | MSCTNR-60 / AF 140 | 104,8 | 140 | 5″-82,563 | 11 | 24 | 1,6 | ||
2 | MSCTNR-70 / AF 150 | 133,4 | 150 | FLAT 140 | 11 | M12 | 104,8 | 20 | 2 |
2 | MSCTNR-70 / AF 150 | 133,4 | 150 | 5″-82,563 | 11 | M12 | 104,8 | 20 | 2 |
2 | MSCTNR-70 / AF 170 | 133,4 | 170 | 5″-82,563 | 11 | M12 | 104,8 | 24 | 2,7 |
2 | MSCTNR-70 / AF 170 | 133,4 | 170 | 5″-82,563 | 11 | M12 | 104,8 | 30 | 3 |
1 | MSCTNR-70 / AF 170 | 133,4 | 170 | 6″-106,375 | 13 | 17 | 1,5 | ||
1 | MSCTNR-70 / AF 170 | 133,4 | 170 | 6″-106,375 | 13 | 24 | 2,1 | ||
1 | MSCTNR-70 / AF 170 | 133,4 | 170 | 6″-106,375 | 13 | 30 | 2,6 | ||
2 | MSCTNR-80 / AF 180 | 160 | 180 | 5″-82,563 | 11 | M12 | 104,8 | 24 | 3,2 |
2 | MSCTNR-80 / AF 180 | 160 | 180 | 6″-106,375 | 13 | M12 | 133,4 | 24 | 3 |